Additional information
| size | 125ml, 500ml |
|---|
Seatpost Protection Spray
Price range: ₹330.00 through ₹770.00
- Prevents rusting & seizing
- Provides protection for 3-6 months
- Repels moisture from settling
- Allow 24 hours before re-assembly
- Prevents slippage if spray is single layer
- Use once in three months for best results
- For anti-slip property apply thin layer and leave overnight without assembling the seatpost
- Disassemble the seatpost, clean well with BCCQ then apply SPS
Related products
- PUMPED Stanchion Suspension Fork SprayPrice range: ₹330.00 through ₹770.00
- Improves travel
- Keeps seals in excellent condition Keeps dirt out of the internal parts
- Repels water and dirt from passing through Use once a month or once in two months for best results; preferably after every full wash Protects stanchions from rust and corrosion
- Wear gloves and mask while using FRK Spray thin layer on the stanchion and spread with your index finger.
- Spray carefully to avoid spill on other parts
- RUSTY All Purpose Anti-Rust SprayPrice range: ₹330.00 through ₹660.00
- Dual purpose - removes rust and prevents rust
- Will remove one layer of rust at a time
- 3x more effective in rust loosening
- Tested in extreme conditions (high seas)
- Stops squeaking & provides light smoothness
- Excellent penetration capacity
- Removes stickers and gum stuck on shop floor
- Has cleaning properties as well
- Do NOT use on the chain, other than to remove rust.
- Make sure you use chain cleaner soon after
- RIMMER Bicycle Rim Protection SprayPrice range: ₹330.00 through ₹770.00
- Keeps metal rims from rust and corrosion
- Protects from environmental effects
- Remove tyre, tube and rim tape
- Clean insides of rim with QuickDry (BCCQ)
- Wipe off all dirt and spray a thin layer of RPS
- Wait for 2 hours to dry completely
- Re-install rim tape, tyre and tube Provides protection for 6-12 months While spraying the inside, allow to seep through the spoke nipple gaps during service
- Alternatively, all spoke nipples can be cleaned and sprayed with RPS before building the rim
